OPAM Reagent Pump has been designed to replace dropping funnels in synthetic chemistry.   It can also be used for many other purposes, where rather slow liquid transfer is needed in a laboratory.

Reagent Pump is a solenoid driven pulsating pump and the pumping speed is changed by adjusting the pulse repetition time. It keeps the flow rate constant as adjusted.  The pump is self-priming.

The wetted surfaces are made of teflon and its derivatives and therefore the pump can be used for practically all liquids used in a chemical laboratory.   Cleaning is carried out simply by pumping solvent or other cleaning agent through the tubes.

External control can be achieved simply by cutting off- and on 12 V power supply.   This can be made for example with OSP controller Output controls.

Pumping speed:    Range 1.   0,2....3 ml/min       Range 2.   3....15 ml/min.